6 network drives sub-menu, 7 other drives sub-menu, 7 system management menu – Kontron KTC5520-EATX User Manual
Page 92: System management menu
76
www.kontron.com
5.1.6.6
Network Drives sub-menu
5.1.6.7
Other Drives sub-menu
5.1.7
System Management menu
Feature
Options
Description
Setup Help
1st Drive
Specifies the boot
sequence from the
available devices.
...
N th Drive
Specifies the boot
sequence from the
available devices.
Feature
Options
Description
Setup Help
1st Drive
Specifies the boot
sequence from the
available devices.
...
N th Drive
Specifies the boot
sequence from the
available devices.
Feature
Options
Description
Setup Help
Status of IPMC
Working or
Not Working
Indicate if the BIOS was able to communicate
with the IPMC.
N/A, display only.
BMC Synchronization
Disabled
Enabled
Synchronize Baseboard
Management Controller
initialization with BIOS
POST initialization.
Set LAN Configuration
N/A
Press Enter to go to sub screen "Set LAN
Configuration".
InPut for Set LAN
Configuration command.
See IPMI 1.5 Spec,
table 19.1
NOTE:
- Each question in
this group may take
considerable amount of
time. (direct access
to IPMC)
IPMI Device and Firmware
Information
N/A
Press Enter to go to sub screen "IPMI Device
and Firmware Information".
View IPMI Device and
Firmware Information
FRU Board Information
N/A
Press Enter to go to sub screen "FRU Board
Information".
Display FRU board and
product information,
Display IPMC device
and FW information.