Kontron KTC5520-EATX - Manual (Page 47)

31 KTC5520/EATX
www.kontron.com
5. Software Setup
5.1 AMI BIOS Setup Program
All relevant information for operating the board and connected peripherals are stored in the CMOS memory
backed-up by a battery or in the main BIOS flash and EEPROM. The latest is the default configuration.
5.1.1 Accessing the BIOS Setup Utility
The system BIOS (Basic Input Output System) provides an interface between the operating system and the
hardware of the KTC5520/EATX board. It uses the AMI Setup program, a setup utility in flash memory that is
accessed by pressing the (or from a console redirection terminal) key at the appropriate time
during system boot. This utility is used to set configuration data in CMOS RAM.
To run the AMI Setup program incorporated in the ROM BIOS:
• Turn on or reboot the system.
• When you get the following messages, hit key to enter SETUP.
AMIBIOS(C)2010 American Megatrends, Inc.
KONTRON KTC5520/EATX BIOS Version 2.04
(C) American Megatrends, Inc.
64-3047-009999-00101111-112408-TYLSBURG-5007_204-Y2KC
CPU : Intel(R) Xeon(R) CPU E5540 @ 2.53GHz
Speed : 2.53 GHz
Press DEL to run Setup (F4 on Remote Keyboard)
Press F11 for BBS POPUP (F3 on Remote Keyboard)
Initializing USB Controllers .. Done.
Memory Channel 0 DIMM 0 Size 1024MB
Memory Channel 0 DIMM 1 Size Not Installed
Memory Channel 1 DIMM 0 Size Not Installed
Memory Channel 1 DIMM 1 Size Not Installed
Memory Channel 2 DIMM 0 Size Not Installed
Memory Channel 2 DIMM 1 Size Not Installed
DDR3: 1016MB OK, Speed: 1333MHz
USB Device(s): 1 Keyboard, 1 Storage Device
Auto-detecting USB Mass Storage Devices ..
Device #01 : Corsair Flash Voyager *HiSpeed*
01 USB mass storage devices found and configured.
Initializing Intel(R) Boot Agent GE v1.3.24
PXE 2.1 Build 086 (WfM 2.0)
Initializing Intel(R) Boot Agent GE v1.3.24
PXE 2.1 Build 086 (WfM 2.0)
The main menu of the AMI BIOS CMOS Setup Utility appears on the screen.