Kontron KTC5520-EATX - Manual (Page 59)

43 KTC5520/EATX
www.kontron.com
5.1.4.2.2.1 Primary IDE Master sub-menu
Fifth IDE Master N/A
Press Enter to go to sub screen "Fifth IDE
Master".
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
Fifth IDE Slave N/A
Press Enter to go to sub screen "Fifth IDE
Slave".
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
Sixth IDE Master N/A
Press Enter to go to sub screen "Sixth IDE
Master".
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
Sixth IDE Slave N/A
Press Enter to go to sub screen "Sixth IDE
Slave".
While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
Hard Disk Write Protect
Disabled
Enabled
Disable/Enable device
write protection. This
will be effective only
if device is accessed
through BIOS.
Disable/Enable device
write protection. This
will be effective only
if device is accessed
through BIOS.
IDE Detect Time Out (Sec)
0
5
10
15
20
25
30
35
Select the maximum time out
value for detecting
ATA/ATAPI device(s).
Select the time out
value for detecting
ATA/ATAPI device(s).
Feature Options Description Setup Help
Device Device type
Displays the type of device (Hard Disk, CD-ROM
or ARMD).
N/A, display only.
Vendor
Disk vendor and
description
Displays the device vendor name and/or
model.
N/A, display only.
Size X KB/MB/GB Displays system memory size. N/A, display only.
LBA Mode
Supported
Not Supported
Displays if LBA mode is supported or not by the
device.
N/A, display only.
Block Mode x Sectors
Displays the Block mode size used by the
device.
N/A, display only.
PIO Mode 0-4 Displays the PIO mode used by the devices. N/A, display only.
Feature Options Description Setup Help