Kontron KTC5520-EATX - Manual (Page 90)

74 KTC5520/EATX
www.kontron.com
5.1.6.1 Boot Settings Configuration sub-menu
5.1.6.1.1 Boot Device Priority sub-menu
Feature Options Description Setup Help
Boots Graphic Adapter
Priority
Auto
Onboard VGA
Select which graphics
controller to use as
the primary boot
device.
Select which graphics
controller to use as
the primary boot
device.
Quiet Boot
Disabled
Enabled
Disabled: Displays
normal POST messages.
Enabled: Displays OEM
Logo instead of POST
messages.
Disabled: Displays
normal POST messages.
Enabled: Displays OEM
Logo instead of POST
messages.
AddOn ROM Display Mode
Force BIOS
Keep Current
Set display mode
for Option ROM.
Set display mode
for Option ROM.
Bootup Num-Lock
Off
On
Select Power-on state
for Num-Lock.
Select Power-on state
for Numlock.
PS/2 Mouse Support
Disabled
Enabled
Auto
Select support
for PS/2 Mouse.
Select support
for PS/2 Mouse.
Wait For 'F1' If Error
Disabled
Enabled
Stop BIOS boot and wait for F1 key when an
error is detected.
Wait for F1
key to be
pressed if
error occurs.
interrupt 19 Capture
Enabled
Disabled
Enabled: Allows option
ROMs to trap interrupt
19
Feature Options Description Setup Help
1st Boot Device Type: Boot device
Specifies the priority of the available boot
sources.
The list includes USB CD ROM, USB Hard Drive,
Hard Drive and PXE. Other supported devices
might be dynamically added to the list.
Specifies the boot
sequence from the
available devices.
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.
...
N th Boot Device Type: Boot device
Specifies the priority of the available boot
sources.
The list includes USB CD ROM, USB Hard Drive,
Hard Drive and PXE. Other supported devices
might be dynamically added to the list.
Specifies the boot
sequence from the
available devices.
A device enclosed in
parenthesis has been
disabled in the
corresponding type
menu.