Kontron AT8050 User Manual
Page 78
62
www.kontron.com
Table 4-23: Carrier AMC.0
4.3.3.3
AMC Carrier Point-To-Point Connectivity Information
As defined in the AMC.0 specification, On-Carrier Device Ids are arbitrarily assigned to devices that
implement E-Key governed links. Remote resources, such as AMCs, use predefined Ids corresponding to their
Site Numbers. The following table gives the mapping between the devices and the corresponding Ids.
Table 4-24:Mapping between the devices and the corresponding Ids
The Carrier Point-To-Point Connectivity record gives the list of available point-to-point link paths between
On-Carrier Devices and AMC Sites. The record's content is given by the following table.
Table 4-25:Record's content
Field
Value
Record Type ID
C0h
Record format version
02h
Record Length
*Calculated
Record Checksum
*Calculated
Header Checksum
*Calculated
Manufacturer ID
00315Ah (PICMG Record ID)
PICMG Record ID
0x1A (Carrier Information Table)
Record Format Version
00h
AMC.0 Extension Version
02h (AMC.0 R2.0)
Carrier Site Number Count
01h
Carrier Site Number
05h
Devices
Resource Id
Intel IOH PCI-Express Root Complex Port 3
00h
Intel IOH PCI-Express Root Complex Port 8
01h
Intel ICH10 SATA Controller
02h
Intel 82576EB NC (front/rear)
03h
Onboard Fabric Channel 1 Switch
04h
Onboard Fabric Channel 2 Switch
05h
FPGA Based UART
06h
RTM (On-Carrier Virtual Device for RTM)
07h
AMC B1 (AMC Site Number 5)
85h
Field
Value
Record Type ID
C0h
Record format version
02h
Record Length
*Calculated
Record Checksum
*Calculated
Header Checksum
*Calculated