Kontron AT8050 - Manual (Page 32)

16 AT8050
www.kontron.com
2.9.4 Ethernet Interfaces Configuration
Many Ethernet configurations are available with the crosspoint switch. Below is a block diagram that shows
all the supported crosspoint switch configurations.
Figure 2-2:Available Ethernet Interfaces Configurations
Note:
- The AMC must be able to support GbE on ports 8-11
- Connection from AMC to the Fabric Interface is either PICMG3.1 option 2 (2x1GbE) or PICMG3.1
option 1 (1xGbE).
Fabric Interface
Ch. 1 & 2
82599EB
10 GbE
MGNT
82576EB
Front
2x RJ-45
AMC
Base Interface
Ch. 1 & 2
BI
82576EB
Ports 8-11
Ports 0-1
RTM
Ports 0-1 Ports 0-1
Ch. 1 & 2
Ch. 1 & 2
10 GbE only
GbE, 10 GbE
Possible Path
Possible Path
Paths are configurable in BIOS
GbE only