1 memory list and characteristics, Memory list and characteristics, Table 3-2 approved memory list – Kontron AT8050 User Manual
Page 48
32
www.kontron.com
3.3.1
Memory List and Characteristics
Table 3-2:Approved Memory List
Memory should have the following characteristics:
• DDR3 1066
• 1.5V typical
• Single or dual-rank modules are supported
• x4 or x8 memory with up to 4 ranks per DIMM
• Registered & ECC
• Only very low profiles (VLP) 0.72inches maximum heights (18.3mm)
Manufacturer Part Number
Description
Company
VL33B5663F-F8M
DIMM DDR3-1066 2GB256M*72 REG ECC 0.70"
VIRTIUM
SG572568FH8P6LC2
DIMM DDR3-1066 2GB256M*72 REG ECC 0.70"
Smart modular
VL33B5168F-F8M
DIMM_DDR3-1066_4GB_512M*72_REG_ECC_0.70"
VIRTIUM
VL33B5168F-F8S
DIMM_DDR3-1066_4GB_512M*72_REG_ECC_0.70"
VIRTIUM
VL33B5663F-F8S-H
DIMM DDR3-1066 2GB256M*72 REG ECC 0.733"
VIRTIUM
VL33B5663E-F8M
DIMM DDR3-1066 2GB256M*72 REG ECC 0.733"
VIRTIUM
WARNING
Because static electricity can cause damage to electronic devices, take the following
precautions:
Keep the board in its anti-static package, until you are ready to install memory.
Wear a grounding wrist strap before removing the board from its package; this will
discharge any static electricity that may have built up in your body.
Handle the board by the faceplate or its edges.