Kontron AT8050 - Manual (Page 129)

Software Setup
113 AT8050
www.kontron.com
5.1.8 Exit Menu
5.2 Boot Utilities
AMI Boot Utilities are: Boot Menu POP-UP
Boot Menu POP-UP is a boot screen that displays a selection of boot devices from which you can boot your
operating system.
5.2.1 Entering BIOS Setup Menu
Pressing (or from a console redirection) during POST enters BIOS Setup.
5.2.2 Boot Menu POP-UP
Pressing (or from a Console Redirection terminal) displays the Boot Menu POP-UP with these
options:
1 Load the operating system from a boot device of your choice.
2 Exit the Boot Menu POP-UP (with ) and load the operating system from the boot devices in the order
specified in Setup.
5.2.3 SAS Option ROM
To access the SAS Option ROM, follow the procedure listed below.
1 Option ROM for SAS needs to be enabled and the RTM must be present.
2 Press "F3" to select the boot device.
3 Press "CTRL-C" during the execution of the option ROM.
Feature Option Description Help text
Exit Saving Changes N/A
Saves modified settings into non-volatile
memory and reboots the system.
Exit system setup saving
changes to non-volatile
memory.
Exit Discarding Changes N/A
Discards modifications to settings and reverts
to the state when Setup was entered, then
complete remaining POST.
Exit system setup
without saving changes.
Load Setup Defaults N/A Loads the factory default settings. Load default settings.
Discard Changes N/A
Discards modifications to settings and reverts
to the state when Setup was entered.
Discard changes without
exiting setup.
Exit & Execute
BIOSRollback
N/A
Exits the Setup utility without saving any
changes and then performs a Rollback of the
on-board BIOS chips. If the currently
executing BIOS was the primary BIOS, the
system would change to the backup BIOS (and
vice versa).
Rollback BIOS without
saving any changes.