Dynojet 250i: Installation Guide - Manual (Page 61)

I N S T A L L A T I O N
Drum Side and Top Covers
Version 5 Model 200i and 250i Motorcycle Dynamometer Installation Guide
2-39
2 Secure the top of the side drum covers with the screws you removed earlier.
3 Refer to Appendix D and install and adjust the finger guards if they are required in
your location.
4 Secure the top drum cover to the dyno using the eight screws removed earlier.
Figure 2-40: Replace the Top Drum Cover
MC047
top drum cover