Dynojet 250i: Installation Guide - Manual (Page 60)

Model 200i and 250i Motorcycle Dynamometer Installation Guide
C H A P T E R 2
Drum Side and Top Covers
2-38
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DRUM SIDE AND TOP COVERS
Before replacing the covers, be sure to install the battery, pickup card, eddy
current brake, and any accessories you may have purchased with your dyno.
Refer to Chapter 3 for accessory installation instructions.
1
Secure each side drum cover to the dyno using six of the screws you removed
earlier.
Figure 2-39: Replace the Side Drum Covers
side drum cover
side drum cover