Arc Machines 207 - Manual (Page 36)

MODEL 207A AND 207A-1
OPERATION MANUAL
Doc. No. 740044
Rev F
SECTION IV - SYSTEM FUNCTIONS
4.10
GLOSSARY OF DISPLAY TERMS (continued)
ROTOR OD = Outside diameter of M-9 rotor.
SENSOR 1, 2, 3 = User defined faults.
STORE = Puts weld information into memory.
TRANSFER = Allows copying of memory to another M-207A or to the
M-207-EMM.
TYPE = Describes the basic type of weld.
WALL = Wall thickness of the weld.
WARNING = Used to indicate that if step is continued a permanent loss
of information will result.
4.17