Date and time tools, Displaying the time menu, To copy the date to the stack or history – HP 49g Graphing Calculator User Manual
Page 111: To copy the time to the stack or history, Date and time formats -1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
You can also use this procedure to set the date and time.
You
can
also
set
the
date
by
executing
the
^
date
command,
and
set the time by executing the ^TIME coiraiiand.
Date and time tools
Numerous tools for working with dates and times are available from the
Time menu.
Displaying the Time menu
Tlrere are two ways to access this menu:
® press
0
(TÍME)
TOOLS
® hold down
0
while pressing
(TÍME).
To copy the date to the stack or history
1. Display the Time menu (see above).
2. Press
DATE.
3.
Press
(ENTER).
The date is displayed in its mimber format (see the table on page
page 12-1).
In RPN mode: follow steps 1 and 2.
To copy the time to the stack or history
1. Display the Time menu (see above).
2. Press
TIME.
3.
Press (mm.
The time is displayed in its
7
iumber fomiat (see the table on page
page 12-1).
In RPN mode: follow steps 1 and 2.
Page 12-2
Date and time arithmetic