Hi photo button (p. 30), El cassette lid (p. 10), Tripod receptade (p. 19) – Sony DCR-PC1 User Manual

Page 94: Batt(battery) release lever (p. 9), To watch the demonstration, To enter demo mode, To exit demo mode, Identifying the parts

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Identifying the parts

Hi PHOTO button (p. 30)

EE START/STOP MODE swtich (p. 15)

Ei Viewfinder lens adjustment lever

(p. 12)

Cassette lid (p. 10)

Tripod receptade (p. 19)
Make sure that the length of the tripod
screw is less than 9/32 inch (6.5 nun).
Otherwise, you caimot attach the tripod
securely and the screw may damage the
camcorder.

BATT(battery) RELEASE lever (p. 9)

To watch the demonstration

You can watch a brief demonstratign of pictures with special effects. If the
demonstration appears when you turn on the camcorder for the first time, exit the demo
mode to use your camcorder.

To enter demo mode
(1) Eject the cassette and set the POWER switch to VTR.
(2)

While holding down^, set the POWER switch to CAMERA. The demonstration

Starts. The" demonstration stops when you insert the cassette.

Note that once you enter demo mode, this mode is retained as long as the rechargeable
lithium battery is in place. Therefore, demonstration starts automatically 10 minutes
later every time you set the POWER switch to CAMERA, and after you eject the

cassette.

To exit demo mode
(1) Tum the POWER switch to VTR.
(2)

While holding down ■, turn the POWER switch to CAMERA.