To erase a character, To change the label you have made, If you have superimposed titles in the cassette – Sony DCR-PC1 User Manual
Page 56: Note on the cassettes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Labeling a cassette
to erase a character
In step 5 him the control dial to select [<■], then press control dial. The last character is
erased.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If the C t M mark appears in step 4
The cassette memory is full. If you erase the title in the cassette, you can label it.
If you have superimposed titles in the cassette
When the label is displayed, up to 4 titles also appiear.
Note on '—' indicator displayed on the LCD screen or in the viewfinder
The "----" indicates the number of characters you can select for the label. When the
"---- " indicator has fewer than 10 spaces, the cassette memory is full.
Note on the cassettes
If you use a cassette tape set to prevent accidental erasure, you cannot label it. Slide the
protect tab so that the red portion is not visible.