Sony DCR-PC1 - Manual (Page 59)

earc
with date - date search
You can search for the boundaries of recorded date - Date Search function. To search
for the beginning of the specific date and play back fram the point, there are two ways:
• Using cassette memory, you can select the date displayed on the LCD screen or in the
viewfinder.
• Without using cassette memory, you can search for the boundaries of recorded date.
You can only operate with the Remote Commander.
You can use this function only when playing back a tape with cassette memory (p. 72).
(1) Set CM SEARCH to ON in the menu system (P. 25).
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the date search
indicator appears.
(3) Press or to select the date for playback.
Playback starts from the beginning of the selected date automatically.
Q.
O
•D
2 SEARCH
MODE
CM SET
m CM SEARCH
r TITLEERASE
r TITLE W8R
BTAPE
TITLE
r ERASE ALL
To stop searching
Press ■.
Notes
• The interval of the boundaries between the dates needs more than two minutes. The
camcorder may not search if the begiiming of the recorded date is too close to the
next one.
• The cursor in the KJa i mark indicates the present point on the tape.
• The cursor on the screen indicates the date selected last time.
• If a tape has a blank portion in the recorded portions, the Date Search function will
not work correctly.