Adding an incidental image to pictures, To cancel the trail function, Notes on the trail function – Sony DCR-PC1 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adding an incidental image to pictures
Using the trail function, you can record the picture whiA leaves an incidental image,
such as a trail. The sound is recorded normally. You can adjust the vanishing time of the
incidental image with the control dial.
(1) While the camcorder is in Standby mode or recording mode, press DIGITAL
EFFECT and turn the control dial until the TRAIL indicator flashes.
(2) Press the control dial.
The TRAIL indicator lights up and the trail bars appear.
(3)
Tum the control dial to adjust the vanishing time of the incidental image.
The vanishing time increases with the number of the trail bars.
To cancel the trail function
Press DIGITAL EFFECT.
Notes on the trail function
• The following functions do not work during trail mode.
- Functions using the FADER button
- Low Lux mode of PRCX3RAM AE
- Functions using the PHOTO button
When
you "Set the
POWER
switch to
OFF,
the trail function will be cancelled
automatically.