Items for vtr mode only, Hifi sound* <«stereo/1/2, Audio mix – Sony DCR-PC1 User Manual
Page 29: Bd cm search <«on/off, Bd title disp <«on/off, Isidata code <«date/cam or date, Changing the mode settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the mode settings
Items
for VTR mode only
^
@ HiFI SOUND* <«STEREO/1/2>
• Select STEREO to play back stereo sound or main and sub sound (for dual sound).
• Select 1 to play back the left sound (for stereo sound) or main sound (for dual sound).
• Select 2 to play back the right sound (for stereo sound) or sub sound (for dual sound).
AUDIO MIX*
Select this item and adjust the balance between the stereo 1 and stereo 2 by turning the
control dial.
Note on AUDIO MIX
When playing back a tape recorded in the 16B1T mode, you cannot adjust the balance
in AUDIO MIX.
BD
CM SEARCH <«ON/OFF>
• Select ON to searcl^ using cassette memory.
• Select OFF to search without using cassette memory.
BD
TITLE DISP <«ON/OFF>
• Select ON to display the title you have chosen.
• Select OFF not to display the title.
IsiDATA CODE <«DATE/CAM or DATE>
• Select DATE/CAM to display date and recording data during playback.
• Select DATE to display date during playback.
These settings return to the default 5 minutes or more after the power source is
discormected or battery is removed. As far as the items without an asterisk are
concerned, their settings are retained even when the power source is disconnected or
battery is removed, as long as fte lithium battery is charged.
* P EFFECT setting returns to OFF when the power is turned off.