To erase a character, To change the title you have made, Note – Sony DCR-PC1 User Manual
Page 54: If it takes more than 5 minutes to make a title, Making a custom title
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Making a custom title
To erase a character
^
In step 4, turn the control dial to select [<-] then press the control dial. The last character
is erased.
To change the title you have made
In step 3, turn the control dial to select CUSTOMl or CUSTOM2 you want to change,
then press the control dial. Erase characters one after another, then make the new title
again.
Note
You cannot enter over 20 characters title.
If it takes more than 5 minutes to make a title
If the Standby mode lasts for more than 5 minutes with a cassette inserted, the power
will be turned off automatically. If the power is turned off while you are making a title,
set the POWER switch to OFF once, then to CAMERA. The title you have made
remains stored in memory.
Set the POWER switch to VTR or eject a cassette so that the power does not go off.