Sony DCR-PC1 - Manual (Page 67)

Editing onto another tape
You can create your own video program by editing with any other IV DV, “"IV mini
DV,
m 8 mm,WB Hi8, SE VHS, KE S-VHS, SEB VHSC, SSEB S-VHSC, [D
Betamax or BBSS ED Betamax VCR that has audio/video inputs. You can edit with
little deterioration of picture and sound quality when using the DV connecting cable.
Connect the camcorder to the VCR using the VMC-2DV/4DV DV connecting cable (not
supplied) or the supplied A/V connecting cable.
Using the DV connecting cable
Simply connect the VMC-2DV/4DV DV connecting cable (not supplied) to DV IN/OUT
and to DV IN/OUT of the DV products. With digital-to-digital connection, video and
audio signals are transmitted in digital form for high-quality editing.
Arrow
(not supplied)?
.: Signal flow
Notes on editing when using the DV connecting cable
• You can connect one VCR only.
*You can record picture, sound and system data at the same time on the DV products
by using the DV connecting cable only.
• You cannot edit the titles, display indicator, or the contents of cassette memory.
• If you record playback pause picture via the DV jack, the recorded picture becomes
rough. And when you playback the picture using the other video equipments, the
picture may jitter.
• You cannot use the functions using the DIGITAL EFFECT button.
• You can also use the camcorder as a recorder with this connection. In this case, "DV
IN" indicator appears on the screen.
• When using this camcorder as a recorder, only the recording buttons on the Remote
Commemder can be used. Press both red and black buttons simultaneously. When
using this camcorder as a recorder, the pictures on a monitor may be uneven,
however, these on the LCD screen, in the viewfinder or recorded pictures are not
affected.