Playing back a tape, Using thè remote commander, To display the lcd screen indicators – Sony DCR-PC1 User Manual
Page 21: Note on screen indicators, Using headphones
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Playing back a tape
You can monitor the playback picture on the LCD scften or in the viewfinder.
(1)
lnsert the recorded tape with the window facing out.
(2)
Press OPEN and open the LCD panel. Adjust the angle of the LCD panel.
(3)
While pressing the small green button on the POWER switch, set it to VTR. The
power lamp under the POWER switch lights up.
(4)
Press ◄◄ to rewind the tape.
(5)
Press ► to start playback.
(
6
)
Adjust the volume using VOLUME and the brightness of the LCD screen using LCD
BRIGHT.
You can also monitor the picture on a TV screen, after connecHng the camcorder to a TV
or VCR.
RCW9 HAY SFT
LCD BRIGHT
To stop playback,
press ■.
To rewind the tape,
press -4^.
To fast-forward the tape rapidly,
press
Using thè Remote Commander
You can control playback using the supplied Remote Conunander. Before using the
Remote Commander, insert the size AA (R6) batteries.
To display the LCD screen indicators
Press DISPLAY, (p. 95)
To erase the indicators, press again.
Note on screen indicators
The screen indicators in the viewfinder are always displayed.
Using headphones
Connect headphones (not supplied) to the AUDIO VIDEO OUT/O jack (p. 97). You can
adjust the volume of the headphones using VOLUME.