Checking the recorded picture, To stop playback, To go back to the last recorded point (end search) – Sony DCR-PC1 User Manual

Page 20: Note on edit search function

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Checking the recorded picture

Using EDIT SEARCH, you can review the last recorded scene or check the recorded

picture on the LCD screen.

(1)

Press OPEN and open the LCD panel.

(2)

While pressing the small green button on the POWER switch, set it to CAMERA.

(3)

Press the -/@ side of EDIT SEARCH momentarily; the last few seconds of the

recorded portion play back

(Ret Review).

Hold down the -/© side of EDIT SEARCH until the camcorder goes back to the
scene you want. The last recorded portion is played back. To go forward, hold down
the + side

(Edit Search).

END SEARCH

To Stop playback

Release EDIT SEARCH.

To go back to the last recorded point (END SEARCH)

Press END SEARCH. The last recorded point is played back for about 5 seconds and

stops. Note that this function does hot work once you eject the tape without cassette

memory after you recorded in the tape. If there is a blank portion in the recorded
portion, the End Searh may not function correctly.

Note on EDIT SEARCH function

changing the-playing direction. The direction may not change properly if pressing EDIT
SEARCH soon after releasing the button.