When fading in [a, When fading out [b, When you use the bounce funrtion – Sony DCR-PC1 User Manual

Page 33: Note on the bounce function, Using the fader function

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the FADER function

if» -

» !

■’■l^-'V* ••,.■

■•W* . 'S

When fading in [a]

(1)

While the camcorder is in Standby mode, press FADER until the desired indicator

flashes.

(2)

Press START /STOP to start recording. The fade indicator stops flashing.

When fading out [b]

(1)

During recording, press FADER until the desired indicator flashes.

(2)

Press START/STOP to stop recording. The fade indicator stops flashing, and then

recording stops.

The fading mode selected last is indicated first of all.

.1 M 1/,

FADER-

- ^.FAOEff^

When you use the bounce funrtion

Set D ZOOM to OFF in the menu system.

Note on the bounce function

When you use the following functions, "BOUNCE" indicator does not appear.

- Wide mode
- Picture effect mode
- PROGRAM AE mode