Searching for the end of the picture, Notes on end search – Sony DCR-PC1 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Searching for the end of the picture

You can go to the end of the recorded portion after ydlrrecord ¿ind play back the tape.
The tape starts rewinding or fast-forwarding and the last about 5 seconds of the
recorded portion plays back. Then the tape stops at the end of the recorded picture

(End

Search).

(1) Press OPEN and open the LCD panel.

(2) Press END SEARCH.

This function works when the POWER switch is set to CAMERA or VTR.

Notes on End Search

• When you use a tape without cassette memory, the End Search function does not

work once you eject the cassette after recording. (The End Search function will work
when you record again.)

• If there is a blank portion in the recorded portion, the End Search may not function

correctly.