Superimposing a still picture on a moving picture, To cancel the still function, Hotes on the still function – Sony DCR-PC1 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Superimposing a still picture on a moving
picture
Using the still function, you can record a still picture*to be superimposed on a moving
picture. The sound is recorded normally.
(1)
While the camcorder is in Standby mode or recording mode, press DIGITAL
EFFECT and turn the control dial until the STILL indicator flashes.
(2)
Press the control dial.
The STILL indicator lights up and the still bars appear. The still picture is stored in
memory.
(3)
Tum the control dial to adjust the rate of the still picture you want to superimpose
on the moving picture. The rate of the still picture increases with the number of the
still bars.
To cancel the still function
Press DIGITAL EFFECT.
hotes on the still function
• You cannot use the foliowing functions while recording a still picture.
- Fimctions using the FADER button
- Low Lux mode of PROGRAM AE
- Functions using the PHOTO button
• When you set the POWER switch to OFF, the still function will be cancelled
automatically.