Resetting the date and time – Sony DCR-TRV10 User Manual
Page 78
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Resetting the date and time___________________
The clock is set to East Coast Standard Time at the factory.
If
you
do
nof
use
your
camcorder
for
about
a
half
year,
the
date
and
time
settings
may
be
released
(bars
may
appear)
because
the
vanadium-lithium
battery
installed
in
your
camcorder will have been discharged.
First, set the year, then the month, the day, the hour and then the minute.
(
1
)
While your camcorder is in the standby mode, press MENU to display the
MENU settings.
(2)
Turn the SEL/PUSH EXEC dial to select ©, then press the dial.
(3)
Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4)
Turn the SEL/PUSH EXEC dial to adjust the desired year, then press the dial.
(5)
Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6)
Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7)
Press MENU to make .the MENU settings disappear.
MANUAL SET
CLOCK SET
W AUTO TV ON
© TV INPUT
B LTR SIZE
m DEMO MODE
SETUP MENU
r TV INPUT
B LTR SIZE
□ OEMO MODE
i PRETURN
SETUP MENU
vr
ìcl
^
k
J
et
I
© AUTO TV ON
© TV INPUT D
B LTR SIZE
n DEMO MODE
@ PRETURN
© AUTO TV ON
® TV INPUT i
IB
LTR SIZE
m DEMO MODE
@ PRETURN
gfcLTOK^lT^JUL
4
2000
g ÀUTO tv ON 5;3O:0OPM
r TV INPUT
i LTR SIZE
S3 DEMO MODE
“i PRETURN
The year changes as follows:
1999
L_
2000
2029
If you do not set the date and time
" — : — i s recorded on the tape and the Memory Stick (tXTR-TRVlO only).
Note on the time indicator
The internal clock of your camcorder operates on a 12-hour cycle.
• 12:00 AM stands for midnight.
• 12:00 PM stands for noon.