Hint – Sony DCR-TRV10 User Manual
Page 156
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
If
a
message
box
appears
indicating
a
communications
problem,
refer
to
steps
6
and
7
of
Connections and Settings, and perform the following steps:
• Decrease the baud rate.
• Confirm that the port settings are correct.
Note
If
an
image
has
been
read
and
any
of
the
following
actions
taken,
repeat
the
procedure
from
step 1.
-
The digital still camera has been turned off and back on.
-
The cable has been disconnected.
-
Any new image has been taken, or an image deleted with the digital camera.
-
The Memory Stick was removed from the camera (for devices that include a Memory
Stick).
Notes
• After working with an image after viewing the List View, such as Single-Image
viewing, some time will be required to re-read the images.
• As the digital still camera and PC are busy communicating until all image are read,
do not disconnect the cable during this period.
Hint
3
(O
Please see page 25.
3
9L
O
tt>
<
21