To cancel the fader function, Using the fader function (1) when fading in [a, When fading out [b – Sony DCR-TRV10 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the fader function
(1) When fading in [a]
In the standby mode, press FADER until the desired fader indicator flashes.
When fading out [b]
In the recording mode, press FADER imtil the desired fader indicator flashes.
The indicator changes as follows:
FADER -* M.FADER -► BOUNCE MONOTONE -► OVERLAP -►
no indicator
The last selected fader mode is indicated first of all.
(Z)
Press START/STOP. The fader indicator stops flashing.
1
iTiTTT^
FADER-
FADER
To cancel the fader function
After the fade in/out is carried out: Your camcorder automatically retunrs to the
normal mode.
Before
the
fade
in/out
is
carried
out:
Before
pressing
START/STOP,
press
FADER
until
the indicator disappears.