Checking the recording, End search / editsearch / rec review, End search function – Sony DCR-TRV10 User Manual
Page 24: Viewing the recording on tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Checking the recording
- END SEARCH / EDITSEARCH / Rec Review
You
can
use
these
buttons
to
check
the
recorded
picture
or
shoot
so
that
the
transition
between the last recorded scene and the next scene you record is smooth.
You can go to the end of the recorded section after you record.
Press END SEARCH in the standby mode.
The
last
5
seconds
of
the
recorded
section
are
played
back
and
playback
stops.
You
can
monitor the sound from the speaker or headphones.
You can search for the next recording start point.
Hold
down
the
+/-
side
of
EDITSEARCH
in
the
standby
mode.
The
recorded
section
is
played back.
+ : to go forward
- : to go backward
Release
EDITSEARCH
to
stop
playback.
If
you
press
START/STOP,
re-recording
begins
from the point you released EDITSEARCH. You cannot monitor the soimd.
You can check the last recorded section.
Press the - side of EDITSEARCH momentarily in the standby mode.
The last few seconds of the recorded section are played back. You can monitor the
sound from the speaker or headphones.
End search function
When
you
use
a
tape
without
cassette
memory,
the
end
search
function
does
not
work
once
you
eject
the
cassette
after
you
have
recorded
on
the
tape.
If
you
use
a
tape
with
cassette memory, the end search function works even once you eject the cassette.
If there is a blank portion in the recorded portion, the end search function may not
work correctly, (p. 109)