Using the fader function – Sony DCR-TRV10 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the fader function
Note
You cannot use the following functions while using the fader function. Also, you cannot
use the fader function while using the following functions.
-Digital effect
- Low lux mode of PRCX5RAM AE (Overlap function only)
- NightShot +SI
0
W shutter
- Photo recording
When the OVERLAP indicator appears
Your camcorder automatically stores the image recorded on a tape. As the image is
being stored, the OVERLAP indicator flashes fast, and the playback picture is
displayed. At this stage, the picture may not be recorded clearly, depetuling on the tape
condition.
When START/STOP MODE is set to
1.
or SSEC
You cannot use the fader function.
While using the bounce function, you cannot use the following functions:
-Exposure
- Focus
-Zoom
- Picture effect
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
- D ZOOM is set to ON in the MENU settings
-Wide mode
- Picture effect
- PROGRAM AE
>
a.
o,
5.
5'
(C
O
■o
a
s
d“.
o