Sony DCR-TRV10 - Manual (Page 114)

'roubleshooting
ymptom Cause and/or Corrective Actions
he cassette label is not recorded. • The tape has no cassette memory.
Use a tape with cassette memory, (p. 109)
• The cassette memory is full.
■> Erase some titles, (p. 67)
• The tape is set to prevent accidental erasure.
Slide the write-protect tab so that red portion is not
visible, (p. 14)
Vhile editing using the i.LINK cable
DV connecting cable), recording
'icture cannot be monitored.
• Remove the i.LINIK cable (DV connecting cable), and
cormect it again. ^
)V synchro-editing does not
unction.
DCR-TRVIO only) • The input selector on the VCR is not set correctly.
-> Set the selector to DV input position. If you use another
DV camcorder, set the power switch to VTR.
• The camcorder is connected to DV equipment of other
than Sony.
Operate normal editing.
• Setting program on a blank portion of the tape is
attempted.
Set the program again on a recorded portion.
The picture from a TV or VCR does
lot appear even when your
:amcorder is connected to outputs
jn the TV or VCR.
• DISPLAY is set to V-OUT/LCD in the MENU settings.
Set it to LCD. (p. 72)
The Remote Commander supplied
with your camcorder does not work.
• COMMANDER is set to OFF in the MENU settings.
Set it to ON. (p. 72)
• Something is blocking the infrared rays.
Remove the obstacle.
• The batteries are inserted in the battery holder with the + -
polarities incorrectly matching the + - marks.
Insert the batteries with the correct polarity, (p. 132)
• The batteries are dead.
Insert new ones. (p. 132)
The melody or beep sounds for 5
seconds. • Moisture condensation has occurred.
4 Remove the cassette and leave your camcorder for at
least 1 hour to acclimatize, (p. 120)
• Some troubles has occurred in your camcorder.
-> Remove the cassette and insert it again, then operate
your camcorder.
While charging the battery pack, no
indicator appears or the indicator
flashes in the display window.
• The AC power adaptor is disconnected.
4 Cormect it firmly, (p. 13)
• Something is wrong with the battery pack,
■* Contact your Sony dealer or local authorized Sony
service facility.
No function works though the
power is on. • Discormecf the power cord of the AC power adaptor or^
remove the battery, then recoimect it in about 1 minute.
Turn the power on. If fhe functions still do not work, open
the LCD panel and press the RESET button beside the
speaker using a sharp-pointed object. (If you press the
RESET button, all the settings including the date and time
return to the default.) (p. 127)
>
Q.
a
115