Photo recording, S video audio/video – Sony DCR-TRV10 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Photo recording
To use the photo recording function using the Remote Commander
Press PHC3TO on the Remote Commander. Your camcorder records a picture on the
LCD screen or in the viewfiitder immediately.
To use the photo recording function during normai CAMERA recording
Press PHOTO deeper. The still picture is tiien recorded for about seven seconds and
your camcorder returns to the standby mode. You cannot select another still picture.
iLVV*îiIî'| >
j
I-> ■)
You can print a stiU picture by using the video printer (not supplied). Coimect the video
printer using the A/V coimecting cable supplied with your camcorder.
Cormect it to the AUDIO/VIDEO jack and connect the yellow plug of the cable to the
video input of the video printer. Refer to the operating instructions of the video printer
as well.
>
o.
<
№
s
s.
o
S.
5'
IQ
o
■D
S VIDEO
AUDIO/VIDEO
: Signal flow
If the video printer is equipped with S video input
Use the S video connecting cable (not supplied). Connect it to the S VIDEO jack and the
S video input of the video printer.