Remote commander, To prepare the remote commander, Identifying the parts and controls – Sony DCR-TRV10 User Manual
Page 130
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Identifying the parts and controls
Remote Commander
rho buttons th.it h.i\ 0 tho s.inu' n.inio on tho Romoto C onim.ituior .is on \ our o.niicordor
tunctioil idoiltic.lllv to
till'
buttons on \ our
I'.lllliOrdt'r
RMT-808
RMT-811
IT]
PHOTO button (p. ."lO, 85)
[2] DISPLAY button (p. 26)
Memory control buttons
(DCR-TRVIO only) (p. 93, 94, 98)
g] SEARCH MODE button (p. 49, 51, 52)
[5]
/►>! buttons (p. 49, 51, 52)
[U Video control buttons (p. 27)
[7] REC button (p. 58,105)/MARK button
(DCR-TRVIO only) (p. 57)
[g AUDIO DUB button (p. 6.3)
[9]
DATA CODE button (p. 26)
Ho] Power zoom button (p. 19)
[U START/STOP button (p. 15)
HU Transmitter
Point toward the remote sensor to
control your camcorder after turning on
your camcorder.
m ZERO SET MEMORY button (p. 48, 58)
To prepare the Remote Commander
Insert 2 size AA (R6) batteries by matching the -r and - polarities on the batteries to
the + - marks inside the battery compartment.
132
Notes on the Remote Commander
• Point the remote sensor away from strong light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote Commander may not function properly.
• Your camcorder works in the commander mode VTR 2. Commander modes 1, 2 and 3
are used to distinguish your camcorder from other Sony VCRs to avoid remote control
misoperation. If you use another Sony VCR in the Commander mode VTR 2, we
recommend changing the commander mode or covering the sensor of the VCR with
black paper.