Sony DCR-TRV10 - Manual (Page 111)

Troubleshooting
Symptom Cause and/or Corrective Actions
A vortical band appears when you
slux>t a subject such as lights or a
candle flame against a dark
background.
• The contrast between the subject and background is to
high. Your camcorder is not a malfunction.
A vertical band appears when you
shoot a very bright subject.
• Your camcorder is not a malfunction.
Some tiny white spots appear in the
viewfinder or on the LCD screen.
• Slow shutter, low lux or NightShot +Slow shutter moc
activated. This is not a malfunction.
An unknown picture is displayed in
the viewfinder or on the LCD screen.
• If 10 minutes elapse after you set the POWER switch t(
CAMERA or DEMO MODE is set to ON in the MENU
settings without a cassette inserted, your camcorder
automatically starts the demonstration.
Insert a cassette and the demonstration stops.
• You can also cancel DEMO MODE. (p. 77)
The picture is recorded in incorrect
or unnatural colors.
• NIGHTSHOT is set to ON.
^ Set it to OFF. (p. 21)
Picture appears too bright, and the
subject does not appear in the
viewfinder or on the LCD screen.
• NIGHTSHOT is set to ON in a bright place.
■* Set it to OFF, or use the NightShot function in a darl
place, (p. 21)
The click of the shutter does not
sound.
• BEEP is set to OFF in the MENU settings.
4 Set it to MELODY or NORMAL, (p. 72)
In the playback mode
Symptom Cause and/or Corrective Actions
The tape does not move when a
video control button is pressed.
• The POWER switch is set to CAMERA or OFF.
•* Set it to VTR. (p. 25)
• The tape has run out.
Rewind the tape. (p. 25)
The playback picture is not clear or
does not appear.
• The television's video channel is not adjusted correct!)
Adjust it. (p. 28)
There are nine horizontal lines on
the picture or the playback picture
is not clear or doeinot appear.
• The video head may be dirty.
■¥ Clean the heads using the Sony DVM12CL cleaning
cassette (not supplied), (p. 121)
No sound or only a low sound is
heard when playing back a tape.
• The volume is turned to minimum.
Open the LCD panel and press VOLUME +. (p. 25)
• AUDIO MIX is set to ST2 in the MENU settings.
-» Adjust AUDIO MIX. (p. 72)
Displaying the recorded date, date
search function does not work.
• The tape has no cassette memory.
Use a tape with cassette memory, (p. 49,109)
• CM SEARCH is set to OFF in the MENU settings.
■* Set it to ON. (p. 72)
The title search function does not
work.
• The tape has no cassette memory.
■> Use a tape with cassette memory, (p. 109)
• CM SEARCH is set to OFF in the MENU settings,
■k Set it to ON. (p. 72)
• There is no title in the tape.
•> Superimpose the titles, (p. 65)
112