To stop searching, Searching a recording by date – Sony DCR-TRV10 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Searching a recording by date
50
(1)
Set the POWER switch to VTR.
(2)
Set CM SEARCH in
BD
to OFF in the MENU settings (p. 72).
(3)
Press SEARCH MODE repeatedly, until the date search indicator appears.
The indicator changes as follows:
DATE SEARCH -► PHOTOSEARCH -» PHOTO SCAN no indicator
(4)
Press to search for the previous date or press ►>< to' search for the next
date. Your camcorder automatically starts playback at the point where the date
changes. Each time you press K4 or your camcorder searches for the
previous or next date.
To stop searching
Press ■.
Notes
• If one day's recording is less than two minutes, your camcorder may not accurately
find the point where the recording date changes.
• The cursor in the log l mark indicates the present point on the tape.
If a tape has a blank portion between recorded portions
The date search function may not work correctly.
Cassette memory
The tape cassette memory can hold six recording date data.