Sony CCD-TRV101 - Manual (Page 97)

others
.ymptom Cause and/or corrective actions
he supplied Remote Commander does • COMMANDER is set to OFF in the menu system.
lOt work.
•
Set it to ON. (p. 32)
Something is blocking the infrared rays.
Remove the obstacle.
• The battery is not inserted with the correct polaritv.
Insert the battery with the correct polarity, (p. 113)
'
The batteries are dead.
Insert new ones. (p. 113)
he CH ARCH lamp flashes after von
hargo the batter\' pack installed in tlu*
amcorder.
• The camcorder is not malfunctioning.
xo function works though the power is • Discc^mect the coimection plug on the batterv pack or
'll. on the AC power adaptor, then reconnect it in about 1
minute. Turn the power on. If the functions still do
not work, press the RESET button on the back of the
battery compatment lid using a sharp-pointed object.
(If you press the RESET button, all the settings
including the date and time return to the default.)
AC power adaptor
■ymptom Corrective actions
he VTR ■ CAMi-.RA or CHARCih lamp • Disconnect the AC power cord. After about 1 minute.
^oes not light. reconnect the AC' power cc'rd. (p. 7)
'he CM ARCH lamp flashe.s. « See the chart on the next page.
'ontinued to tho next page
99