Note on the end search function – Sony CCD-TRV101 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Searching for the end Búsqueda del final
of the picture
de la imagen
You can go to the end of the recorded portion
after you record and play back the tape. The tape
start.s rewinding or fast-forwarding and the last 5
seconds of the recorded portion plays back. Then
the tape stops at the end of the recorded picture
(End Search).
Note that End Search function does not work
once YOU have ejected the cassette after you
recorded on the tape.
Press END SEARCH.
This function works when the POWER switch is
set to either CAMERA or VTR.
Después de grabar y reproducir la cinta puede
desplazarse al final de la porción grabada. La
cinta se rebobina o avanza rápidamente v se
reproducen los últimos 5 segundos de la porción
grabada. Después la cinta se detiene al final de la
imagen grabada
(búsqueda de imágenes
finales).
Ob.serve que la función de búsqueda de imágene
finales no se activa una vez extraído el
videocas.sette después de grabar en la cinta.
Pulse ENDSEAKCH.
Esta funciém se activa cuando el interruptor
POWER está ajustado en CAMERA o \TR.
Note on the End Search function
When
\'Ou
re-record continuouslv after using the
End Search function, you might not be able to
obtain smooth transition between lh<' last scene
and the next scene.
Nota sobre la función de búsqueda de
imágenes finales
Si vuelve a realizar grabaciones de forma
continua después de emplear esta función, es
posible que no pueda obtener una transición
uniforme entre la última escena v la siguiente
28