Installing the battery pack, Instalación del paquete de baterías, To remove the battery pack – Sony CCD-TRV101 User Manual
Page 10: Extracción del paquete de baterías
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Charging and installing the
battery pack
Carga e instalación del
paquete de baterías
Installing the battery pack
(1)
Set the POWER switch to OFF to prevent
misoperation of the camcorder.
(2)
To open the lid of the battery compartment,
slide down the OPEN (ВАТТ) release lever.
(3)
Insert the battery pack in the direction of the
arrow.
(4)
Close the lid until it clicks.
Instalación del paquete de
baterías
(1)
Ajuste el interruptor POWER en OFF para
evitar el funcionamiento incorrecto de la
videocámara.
(2)
Deslice la palanca de liberación OPEN (BATI)
hacia abajo para abrir la tapa del
compartimiento de la batería.
(3)
Inserte el paquete de baterías en la dirección
de la flecha.
(4)
Cierre la tapa hasta que oiga un chasquido.
To remove the battery pack
Open the lid of the battery compartment. Then
release the ВАТТ release lever, and remove the
battery pack. When removing the batterypiack,
keep the lid of the battery compartment upinght
so that the battery pack does not fall out.
Extracción del paquete de baterías
Abra la tapa del compartimiento de la batería.
Sneltc la palanca de liberación ВЛТТ y retire el
paquete de baterías. Al retirarlo, mantenga la
tapa de! compartimiento de la balería en posición
vertical piara evitar que se caiga el paquete de
baterías.
10