Dell PowerVault 124T User Manual
Page 62

Drive TAflag[39]
Diagnostics Required
TapeAlert Log Entry:
0000000002000000
hardware fault
hardware fault that
may be identified by
extended diagnostics
(i.e., SEND
DIAGNOSTIC
command).
Run extended
diagnostics to verify
and diagnose the
problem.
Check the tape drive
user's manual for
device specific
instructions on running
extended diagnostic
tests.
Drive TAflag[50] Lost
Statistics
TapeAlert Log Entry:
0000000000004000
Media statistics have been lost
at some time in the past.
Drive or library
powered on with
tape loaded
Clean the drive.
Retry operation.
Drive TAflag[51] Tape
Directory Invalid at
Unload
TapeAlert Log Entry:
0000000000002000
The tape directory on the tape
cartridge just unloaded has
been corrupted. File search
performance will be degraded.
Error preventing the
tape directory being
updated on unload.
The tape directory can be
rebuilt by reading all the
data.
Drive TAflag[52] Tape
System Area Write
Failure
TapeAlert Log Entry:
0000000000001000
The tape just unloaded could not
write its system area
successfully.
Write errors while
writing the system
area on unload.
Copy data to another
tape cartridge.
Discard the old
cartridge.
Drive TAflag[53] Tape
System Area Read
Failure
TapeAlert Log Entry:
0000000000000800
The tape system area could not
be read successfully at load
time.
Read errors while
reading the system
area on load
Copy data to another tape
cartridge.
Drive TAflag[54] No
Start Of Data
TapeAlert Log Entry:
0000000000000400
The start of data could not be
found on the tape.
Tape damaged, bulk
erased, or incorrect
format.
Check that you are
using the correct
format tape.
Discard the tape or
return the tape to your
supplier.
Drive TAflag[55]
Loading Failure
TapeAlert Log Entry:
0000000000000200
The operation has failed
because the media cannot be
loaded and threaded.
The drive is unable to
load the media and
thread the tape.
Remove the cartridge, inspect
it as specified in the product
manual, and retry the
operation.
Drive TAflag[56]
Unrecoverable
Unload Failure
TapeAlert Log Entry:
0000000000000100
The operation has failed
because the medium cannot be
unloaded.
The drive is unable to
unload the medium.
Remove the cartridge if
possible, inspect it as
specified in the product
manual, and retry the
operation.