Dell PowerVault 124T User Manual
Page 47
42
Media (MAM) Info Error
Verify that a valid cartridge type is in use.
Repeat operation with a new piece of media.
If the operation fails with two different pieces of media, see
Contacting Dell
.
43
Invalid Media Type
44
Expired Cleaning Media
45
Unknown Media Error
46
Drive/Media Error
Miscellaneous Error Types
47
EEROM Chksum Error
Contact
48
Fan Sense Motion Error
Verify that the main fan is moving freely when the unit is on.
If the previous step fails, see
Contacting Dell.
49
Offline
Diagnostics controlling system. No action required.
4A
Host Lock Prevents Eject
Host backup software has issued PREVENT/ALLOW MEDIUM REMOVAL
command, often called a "lock" by the host backup software.
Issue an Unlock command through the host backup software, or
power cycle the autoloader using the Operator Control Panel
power button to clear the lock setting.
4B
Open Front
All motor movement, including picker and magazine rotation, has been
disabled for safety reasons.
Verify the magazine or magazine blank is completely inserted on
both the left and right sides of the autoloader.
Replace magazine or magazine blank (try a second one if
possible).
If the Random Moves test failed, see steps above for necessary
actions.
If all previous steps fail, see
Contacting Dell
.
4C
Over Temp
Verify the temperature of the autoloader inlet air is within
specification.
Clear debris from all openings of the autoloader, both in front and
back.
Verify that the fan is working.
If all previous steps fail, see
Contacting Dell
.
TCP/IP Stack and Task Error Types
50
IP Stack Panic
Verify that the autoloader is connected to the correct network.
Verify that the network is properly configured (i.e. no loop-back
condition exists).
Verify that the autoloader operates correctly when properly
configured and attached directly to a host system using a cross-
over cable.
If all previous steps fail, see
Contacting Dell
.
51
IP Stack Memory
Allocation Error
52
IP Stack Can't Free
Memory
53
Stack DTrap Occurred
Loader Task Error Types
60
Drive Init Failed
Check
or PowerVault 124T firmware updates.