Dell PowerVault 124T - Manual (Page 44)

Error
Type
Description Recommended Action
Autoloader Operating System Failure Types
01 Resource Deleted
Errors 01-25 indicate that an unexpected event has occurred within the
autoloader internal operating system. The autoloader internal operating
system is called ThreadX, and some error messages may be preceded
by a 'TX' notation.
For any of these events:
Power cycle the autoloader.
Run the Random Moves test from either the Remote Management
Unit (RMU) or the Operator Control Panel (OCP).
Note: The Random Moves test requires a minimum of two
cartridges present within the autoloader.
Check support.dell.com for PowerVault 124T firmware updates.
If all previous steps fail, see Contacting Dell .
02 Pool Error
03 Pointer Error
04 Wait Error
05 Size Error
06 Group Error
07 No Event Timeout
08 Option Error
09 Queue Error
0A Queue Empty
0B Queue Full
0C Semaphore Error
0D Semaphore Timeout
0E Thread Error
0F Priority Error
10 Start Error
11 Delete Error
12 Resume Error
13 Caller Error
14 Suspend Error
15 Timer Error
16 Tick Error
17 Activate Error
18 Threshold Error
19 Suspend Lifted
1A Block Pool Error
1B Queue Function Failed
1C Semaphore Function
Failed
1D Timer Function Failed
1F Thread Function Failed
20 Command Started
21 System Failure
22 System Busy
23 System Timeout