Viewing status information – Dell PowerVault 124T User Manual

Page 19

Use of all RMU web pages features requires Java Script to be enabled in the user's web browser.

To open the RMU:

1. From your computer, open your Web browser.

2. In the browser's address field, enter the IP address (also see "

IPv6 Addendum

") for your autoloader

(see "

Viewing Ethernet Information

").

The Home page appears in your browser window.

Viewing Status Information

RMU Web Interface Status Pane

1. System Status - provides model and serial number (S/N) of both the autoloader and the drive. This

section also contains the Dell Service Tag number. You will need this number if you call for technical

support.

2. Autoloader - provides status specific to the automation device. Refer to

Front Panel Administration

for information regarding magazine configuration. Refer to

Installation Overview

for information

regarding enabling or disabling the Barcode Scanner.

3. Drive - provides status information specific to the drive. Refer to

TapeAlert Logs

for information

regarding drive Tape Alert flags.