Dell PowerVault NX300 - Manual (Page 96)

96
Installing System Components
Removing the Integrated Storage Controller Card
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
2 Open the system. See "Opening the System" on page 82.
3 If installed, remove the expansion card. See "Removing an Expansion
Card" on page 95.
4 Remove the card from the storage controller card slot:
a Pull the blue release lever to free the card from the connector on the
expansion-card riser.
b Lift to remove the card.
book.book Page 96 Thursday, August 13, 2009 7:27 AM