Dell PowerVault NX300 - Manual (Page 119)

Installing System Components
119
1.Requires x4- or x8-based memory modules.
Installing Memory Modules
WARNING:
The memory modules are hot to the touch for some time after the
system has been powered down. Allow time for the memory modules to cool
before handling them. Handle the memory modules by the card edges and avoid
touching the components on the memory module.
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
CAUTION:
To ensure proper system cooling, memory-module blanks must be
installed in any memory socket that is not occupied. Remove memory-module
blanks only if you intend to install memory in those sockets.
Table 3-3. Sample UDIMM Memory Configurations (Per Processor)
Memory
Mode
Memory
Module
Size
Memory
Sockets Single Processor Dual Processor
4 1 2 3 Physical
Memory
(GB) Available
Memory
(GB) Physical
Memory
(GB) Available
Memory
(GB)
Optimizer 1-GB
X
X
X
X
X
X
X
X
X
X
1
2
3
4 all 2
4
6
8 all
2-GB
X
X
X
X
X
X
X
X
X
X
2
4
6
8 all 4
8
12
16
all
Advanced
ECC
1
1-GB X X 2 all 4 all
2-GB X X 4 all 8 all
Mirroring 1-GB X X 2 1 4 2
2-GB X X 4 2 8 4
book.book Page 119 Thursday, August 13, 2009 7:27 AM