Dell PowerVault NX300 - Manual (Page 101)

Installing System Components
101
3 Locate the USB connector on the control panel board. See Figure 3-12.
4 Insert the USB memory key into the USB connector.
5 Close the system. See "Closing the System" on page 83.
6 Reconnect the system to power and restart the system.
Figure 3-12. Removing or Installing a USB Memory Key
System Board Shroud
The system board shroud covers the processor, heat sink, memory modules,
and system battery and provides air flow to these components. Airflow is
facilitated by the cooling fan modules, which are positions directly behind the
system board shroud.
1 USB memory key 2 USB memory key connector
1
2
book.book Page 101 Thursday, August 13, 2009 7:27 AM