Dell PowerVault NX300 - Manual (Page 128)

128
Installing System Components
8 Verify that the processor is properly aligned and seated.
9 Close the processor shield. See Figure 3-24.
10 Rotate the socket-release lever down until it snaps into place. See
Figure 3-24.
Figure 3-24. Installing a Processor
11 Install the heat sink.
NOTE:
Your kit may contain a replacement heat sink if you are installing a
processor that consumes additional power. The new heat sink may not appear
different than the original one; however, it has improved thermal dissipation
specifications and must be used.
CAUTION:
Applying too much thermal grease can result in excess grease coming
in contact with and contaminating the processor socket.
a Using a clean lint-free cloth, remove the thermal grease from the heat
sink.
1 socket-release lever 2 processor
3 processor shield
1
2
3
book.book Page 128 Thursday, August 13, 2009 7:27 AM