Dell PowerVault NX300 - Manual (Page 87)

Installing System Components
87
b Insert the hard-drive carrier into the drive bay until the carrier
contacts the backplane.
c Close the handle to lock the drive in place. With the lever on the
hard drive carrier open, slide the hard drive into the drive bay until the
carrier contacts the backplane (see Figure 3-5).
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-6.
Figure 3-6. Installing a Hard Drive Into a Drive Carrier
*Screws are supplied along with the hard drives ordered from Dell.
1 drive carrier 2 screws (4)*
3 hard drive 4 SAS/SATA screw hole
4
3
1
2
book.book Page 87 Thursday, August 13, 2009 7:27 AM