Dell PowerVault NX300 - Manual (Page 102)

102
Installing System Components
Removing the System Board Shroud
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Open the system. See "Opening and Closing the System" on page 82.
2 Locate the two shroud tabs with blue dots between the fan assemblies. See
Figure 3-13.
3 Grasping the tabs, gently lift the shroud straight up and away from the
system board. See Figure 3-13.
4 Remove the system board shroud.
Figure 3-13. Installing and Removing the System Board Shroud
1 power distribution board shroud 2 system board shroud
3 tabs (2)
1
3
2
book.book Page 102 Thursday, August 13, 2009 7:27 AM