Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 85)

To specify the path and name of the filename character translation text file for Server for NFS to use, modify the following
registry key to contain the path and filename of the character translation file:
HKLM\SOFTWARE\Microsoft\Server for NFS\CurrentVersion\Mapping\CharacterTranslation
File Server for Macintosh
File Server for Macintosh (FSM) provides the tools needed to integrate Macintosh and Windows networks by leveraging
existing Macintosh network resource and expertise. FSM is disabled by default on the NAS system. See " Enabling the
AppleTalk Protocol " for information about enabling FSM.
Enabling the AppleTalk Protocol
The AppleTalk protocol is disabled on the NAS system by default. You must enable the AppleTalk protocol for Macintosh
clients to access the NAS system.
To enable the AppleTalk protocol, perform the following steps:
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager " in "NAS Manager."
2. Click Shares.
3. Click Sharing Protocols.
4. Click AppleTalk Protocol, and then click Enable.
Adapter Bindings
FSM can bind to only one network adapter. By default, it is bound to the embedded 10/100TX Network Adapter. To
change the binding in systems with multiple network adapters, the AppleTalk protocol properties for the network adapter
to be used by AppleTalk must be modified to accept inbound connections.
AppleTalk Protocol Adapter Binding
To modify the AppleTalk protocol adapter binding for filers with multiple network adapters, perform the following steps
from the NAS Manager:
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager " in "NAS Manager."
2. Click Network.
3. Click Interfaces.
4. Click the radio button next to an enabled adapter to bind the AppleTalk protocol.
NOTE: The AppleTalk protocol must bind to an adapter that is enabled, regardless of whether the File Server
for Macintosh is disabled.
5. On the Tasks menu, click AppleTalk.
6. Click the check box next to Enable inbound AppleTalk connections on this adapter.
7. Optionally, if you use AppleTalk zones, select the appropriate zone in the drop-down box.
8. Click OK.
Microsoft UAM Volume