Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 75)

b. Map a network drive to the CD share, but do not select Reconnect at logon.
c. Browse to the mapped drive, and then double-click the CD icon to launch the Multilingual Support CD's Web
interface.
d. Click the Install Multilanguage User Interface (MUI) Support link to launch the Multilanguage File
Installation installer program.
8. In the installer window, select the languages to be installed, and select the default MUI language from the menu.
9. Click OK to perform the installation.
10. If the Insert Disk window appears, you must perform the following steps:
a. Click OK.
b. In the Files needed window, click Browse, browse to the i386 directory on the Multilingual Support CD or
in the C:\localization directory (which does not exist if you reinstall the operating system), and then click
Open.
c. If the Insert Disk window displays, click OK to allow the operating system to find the required files for
installation.
11. Disconnect the mapped network drive from the CD share that you mapped in step 7.
12. After the installation is complete and you have disconnected the network drive, you must reboot your system.
After a MUI language has been installed, you can apply it to any user by performing the following steps:
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager " in "NAS Manager."
2. Click Maintenance, and then click Terminal Services.
3. Log in to the system as an administrator.
The default administrator user name is administrator and the default password is powervault.
4. On the Advanced Administration Menu, click System Management, and then click Set Regional Options to
launch the Regional Options control panel.
5. On the General tab, select the MUI language from the Your locale (location) drop-down menu, and then click
Apply.
6. Log off and log in to the system again for the new language MUI to take effect.
Installing and Configuring Support for Other Languages
NOTE: Install additional language locales only if your preferred language is not available with MUI support or you
need additional locale support.
The Windows Powered operating system that comes installed on the PowerVault 715N can be configured to support
reading and writing documents in a number of languages. To install the software required to support a specific language,
perform the following steps:
1. Log in to the NAS Manager.
See " Logging in to the NAS Manager " in "NAS Manager."
2. Click Maintenance, and then click Terminal Services.
3. Log in to the system as an administrator.