ADS Environmental Services RainAlert II QR 775008 A2 - Manual (Page 42)

4-1
C H A P T E R 4
Communication
After performing the initial installation, it is necessary to establish
communication with the ADS
® RainAlert II ™ monitor and activate
the monitor. Communication can occur through wireless
communication, telephone communication, or a direct serial
connection. This chapter contains instructions on establishing
wireless communication or telephone service at the monitor location
for communicating with the monitor remotely and using the direct
serial cable to communicate with the monitor on-site.
Note: Installers and technicians must comply with all
federal, state, and municipal regulations to ensure all safety
precautions are in place and exercised. ADS is not
responsible for any injuries, damages, claims, or liability
resulting directly or indirectly from the use of this
installation guide or the installation of any ADS
equipment.